Preloader Close

Commercial Standing Seam Metal

Learn More About Standing Seam Metal Roofing Systems

Isaacs Roofing & Sheet Metal specializes in a variety of roofing systems including metal roofing which provides a long-term and durable roofing solution for almost any application from commercial to industrial. Metal roofing options are available in a multitude of colors, finishes, and thicknesses.

Isaacs Roofing & Sheet Metal can help determine the type of metal roofing system best suited for your situation. We can also install both self-adhered and fully-adhered vapor barriers under any of our roofing systems.

Commercial roofs come with a 10 – 25 year manufacturer’s warranty, plus a 2-year in-house warranty.

Standing Seam Metal Roofing Flat Seam

Standing seam metal roofing is fabricated from flat metal material that is roll-formed with a flat horizontal pan and vertical ribs on each side. The flat pan is typically from 12” to 18” wide and the ribs are most often 1” to 3” high. The panels can be made in various profiles for increased stiffness or aesthetic appearance. The seams are made watertight by “locking” or folding over the tops of the vertical ribs, and the top of the standing seam is held above the pan so that running water will not flood into the seam. The panels are held in place by clips which are located inside of the seam. Panels can be made from a wide selection of metal materials and either natural or painted finish, depending on the type of metal.

Designed for relatively little chance of water filtration so long as there is proper slope and flashing
Very few exposed fasteners
Vertical vertical ribs for strength and aesthetic appeal
Can attach claps to the seams to mount items such as snow rails, solar panels and walkways

Variety of metal materials such as galvanized or galvalume steel, aluminum, zinc, copper, and terne
Numerous finishes such as natural, patina, painted, or pre-weathered
Many size options available in various widths, lengths and profiles